Inequalities
How many integers n satisfy 3 < 2n − 5 ≤ 17?
- 6
- 7
- 8
- 11
- 14
Answer: b
Add 5 to each part: 8 < 2n ≤ 22. Divide by 2: 4 < n ≤ 11. The integers are 5, 6, 7, 8, 9, 10 and 11, which is 7 integers.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Algebra: inequalities"; it also notes that answer choices run in increasing or decreasing order.
Number properties
What is the greatest integer k for which 12^k is a factor of 20!, the product of the integers from 1 to 20?
- 18
- 10
- 9
- 8
- 6
Answer: d
12^k = 2^(2k) × 3^k. Factors of 2 in 20!: 10 + 5 + 2 + 1 = 18 (from the multiples of 2, 4, 8 and 16), so 2k ≤ 18 and k ≤ 9. Factors of 3: 6 + 2 = 8 (from the multiples of 3 and of 9), so k ≤ 8. The greatest k is 8.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Arithmetic/number properties: integers, divisibility rules, even and odd numbers, prime numbers, perfect squares"; it also notes that answer choices run in increasing or decreasing order.
Simultaneous equations
If 2x + 3y = 19 and 3x − y = 1, what is the value of x + y?
- 2
- 3
- 5
- 7
- 10
Answer: d
From the second equation, y = 3x − 1. Substitute into the first: 2x + 3(3x − 1) = 19, so 11x − 3 = 19, x = 2 and y = 5. Then x + y = 7. Check: 4 + 15 = 19 and 6 − 5 = 1.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Algebra: simultaneous equations"; it also notes that answer choices run in increasing or decreasing order.
Mixtures
A 40-liter mixture is 3 parts milk to 1 part water. How many liters of the mixture must be drained off and replaced with water so that the result is half milk and half water?
- 10
- 12 1/2
- 13 1/3
- 15
- 20
Answer: c
The mixture holds 30 liters of milk and 10 of water. Drain x liters, which are three quarters milk, and add x liters of water: milk = 30 − 0.75x and water = 10 − 0.25x + x = 10 + 0.75x. Setting them equal, 1.5x = 20 and x = 40/3 = 13 1/3 liters. Each liquid is then 20 liters.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Ratio and proportion: problems with mixtures"; it also notes that answer choices run in increasing or decreasing order.
Functions
If f(x) = 3x + 1 and g(x) = x^2 − 2, what is the value of f(g(2)) − g(f(1))?
- −7
- 0
- 2
- 7
- 21
Answer: a
g(2) = 4 − 2 = 2, so f(g(2)) = f(2) = 3(2) + 1 = 7. f(1) = 4, so g(f(1)) = g(4) = 16 − 2 = 14. The difference is 7 − 14 = −7.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Algebra: functions"; it also notes that answer choices run in increasing or decreasing order.
Statistics
The median of the five numbers 1, 4, 9, 10 and x is equal to their average (arithmetic mean). What is the sum of all possible values of x?
- −4
- 6
- 17
- 21
- 23
Answer: e
The sum is 24 + x, so the mean is (24 + x)/5. If x ≥ 9, the median is 9, so 24 + x = 45 and x = 21, which fits. If 4 ≤ x ≤ 9, the median is x, so 24 + x = 5x and x = 6, which fits. If x ≤ 4, the median is 4, so 24 + x = 20 and x = −4, which fits. The sum is 21 + 6 + (−4) = 23.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Statistics: averages, median, range, mode and standard deviation"; it also notes that answer choices run in increasing or decreasing order.
Probability
A bag holds 5 red marbles and 3 blue marbles. Two marbles are drawn at random, one after the other, without replacement. What is the probability that both are blue?
- 3/28
- 9/64
- 3/8
- 15/28
- 3/4
Answer: a
P(first blue) = 3/8. With one blue marble gone, P(second blue) = 2/7. P(both blue) = 3/8 × 2/7 = 6/56 = 3/28. Counting gives the same: C(3, 2)/C(8, 2) = 3/28.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Probability rules and combinatorics"; it also notes that answer choices run in increasing or decreasing order.
Work rates
Working together, Ravi and Mei can finish a job in 12 days. Working alone, Ravi would take 20 days. How many days would Mei take working alone?
- 32
- 30
- 24
- 16
- 8
Answer: b
Mei's rate = combined rate − Ravi's rate = 1/12 − 1/20 = 5/60 − 3/60 = 2/60 = 1/30 of the job per day. So Mei alone needs 30 days.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Ratio and proportion: work rates"; it also notes that answer choices run in increasing or decreasing order.
Algebraic word problems
A group of friends agreed to split a $360 bill equally. If 3 more people had shared the bill equally, each person would have paid $6 less. How many friends were in the original group?
- 9
- 10
- 12
- 15
- 18
Answer: c
With n friends, 360/n − 360/(n + 3) = 6. Multiply through by n(n + 3): 360(n + 3) − 360n = 6n(n + 3), so 1,080 = 6n(n + 3) and n(n + 3) = 180. Since 12 × 15 = 180, n = 12. Check: $30 each for 12 people and $24 each for 15, a $6 difference.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Word problems: general algebra"; it also notes that answer choices run in increasing or decreasing order.
Decimals and fractions
Which of the following fractions is equal to a terminating decimal?
- 18/48
- 15/36
- 22/48
- 21/45
- 35/63
Answer: a
A fraction in lowest terms is a terminating decimal exactly when its denominator has no prime factors other than 2 and 5. Reduce each choice: 18/48 = 3/8, 15/36 = 5/12, 22/48 = 11/24, 21/45 = 7/15 and 35/63 = 5/9. Only 8 = 2^3 qualifies, and 3/8 = 0.375.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Arithmetic/number properties: terminating and non-terminating decimals"; it also notes that answer choices run in increasing or decreasing order.
Overlapping sets
In a survey of 200 people, 90 read magazine A, 80 read magazine B and 70 read magazine C. Of these, 30 read both A and B, 25 read both A and C, 20 read both B and C, and 10 read all three. How many of the 200 people read none of the three magazines?
- 10
- 25
- 35
- 45
- 175
Answer: b
By inclusion and exclusion, the number who read at least one magazine is 90 + 80 + 70 − 30 − 25 − 20 + 10 = 175. (Subtracting the three pairs removes the all-three readers once too often, so they are added back.) The number who read none is 200 − 175 = 25.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Overlapping sets (Venn diagrams)"; it also notes that answer choices run in increasing or decreasing order.
GCD and LCM
What is the least positive integer that leaves a remainder of 1 when divided by each of 2, 3, 4, 5 and 6, and is divisible by 7?
- 61
- 121
- 181
- 241
- 301
Answer: e
A remainder of 1 on division by 2, 3, 4, 5 and 6 means N − 1 is a multiple of LCM(2, 3, 4, 5, 6) = 60, so N is 61, 121, 181, 241, 301, ... Testing for 7: 61, 121, 181 and 241 are not multiples of 7, but 301 = 7 × 43. So N = 301.
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Arithmetic/number properties: lowest common denominator and greatest common divisor"; it also notes that answer choices run in increasing or decreasing order.
Quadratic equations
If 3 is one solution of the equation x^2 + kx − 18 = 0, where k is a constant, what is the other solution?
- −6
- −3
- −2
- 2
- 6
Answer: a
Substitute x = 3: 9 + 3k − 18 = 0, so k = 3 and the equation is x^2 + 3x − 18 = 0, which factors as (x + 6)(x − 3) = 0. The other solution is −6. (Or: the two solutions multiply to −18, so the other is −18 ÷ 3 = −6.)
Source: GMAT Quantitative Reasoning: 21 Problem Solving questions on arithmetic and elementary algebra, no calculator. This item is a five-choice problem solving question.; GMAC's list of GMAT Quant topics includes "Algebra: quadratic equations"; it also notes that answer choices run in increasing or decreasing order.
Reading: main idea
Lean inventory and the case for buffers
For several decades, the dominant view in operations management held that inventory is waste. Stock sitting in a warehouse ties up cash, occupies space, and, more subtly, hides problems: when a plant keeps weeks of spare parts on hand, a supplier's late deliveries or a machine's high defect rate can go unnoticed because the buffer absorbs the shock. Lean producers, following practices refined by Japanese automakers after the Second World War, cut stock to a minimum precisely so that such problems would surface and be fixed. On this view, low inventory is less a cost-saving device than a diagnostic one.
Critics of lean practice have long argued that its advocates confuse two kinds of disruption. Routine variation, such as a supplier that is often a day late, is exactly what lean methods expose and correct. Rare, large shocks, such as the closure of the only factory that makes a critical component, are a different matter. No amount of process discipline at the buyer's plant can make such an event less likely, and a firm that holds almost no stock has nothing to draw on while it waits for the supplier to recover.
The distinction suggests that the choice is not between lean and bloated operations. A firm can keep inventory low for parts that are made by many suppliers and shipped from nearby while holding deliberate reserves of the few parts that come from a single distant source. Such reserves do not conceal routine problems, the critics note, if managers track them separately and refuse to draw on them for ordinary delays. The harder question is organizational: a reserve that is never used looks, on every quarterly report, like money wasted, and managers rewarded for lowering carrying costs will be tempted to run it down long before the shock it was meant for arrives.
The primary purpose of the passage is to
- argue that lean inventory practice has outlived its usefulness for most manufacturers
- trace how a manufacturing method spread from Japanese automakers to other industries
- explain a limit of a widely used practice and outline a qualified alternative to it
- compare the carrying costs of two inventory systems using figures from several firms
- defend lean producers against the charge that their methods leave firms exposed to delays
Answer: c
The first paragraph sets out the lean view that inventory hides problems. The second shows that this logic fails for rare, large shocks, and the third proposes keeping low stock for most parts while holding tracked reserves of single-source parts, then names an obstacle. That is a limit plus a qualified alternative.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Lean Enterprise Institute: Taiichi Ohno led development of the Toyota Production System through the 1950s and 1960s; its just-in-time flow keeps stock low as part of removing waste. Supports the passage's background only; the argument about buffers is the passage's own.
Reading: supporting detail
According to the passage, lean producers keep inventory low chiefly because low inventory
- makes recurring problems visible so that they can be corrected
- protects the firm when the only maker of a critical part shuts down
- frees warehouse space that can then be used for more production lines
- allows managers to report lower carrying costs every quarter
- encourages suppliers to build their plants close to the buyer's plant
Answer: a
The first paragraph says lean producers cut stock "precisely so that such problems would surface and be fixed" and that low inventory is "less a cost-saving device than a diagnostic one." The point is to expose recurring problems.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Lean Enterprise Institute: Taiichi Ohno led development of the Toyota Production System through the 1950s and 1960s; its just-in-time flow keeps stock low as part of removing waste. Supports the passage's background only; the argument about buffers is the passage's own.
Reading: application
The critics described in the passage would most likely recommend that a firm buying a critical component from a single distant supplier
- hold a reserve of that component and track it apart from stock used for ordinary delays
- keep no stock of that component so that the supplier's late deliveries become visible
- hold large reserves of every single component it buys, whatever the source of each one
- draw on its reserve of that component whenever the supplier is a day or two late
- switch to nearby suppliers for that component even if it then costs several times as much
Answer: a
The third paragraph says a firm can hold deliberate reserves of the few parts that come from a single distant source, and that such reserves do not hide routine problems if managers track them separately and refuse to use them for ordinary delays.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Lean Enterprise Institute: Taiichi Ohno led development of the Toyota Production System through the 1950s and 1960s; its just-in-time flow keeps stock low as part of removing waste. Supports the passage's background only; the argument about buffers is the passage's own.
Reading: function and structure
The final sentence of the passage about lean inventory serves mainly to
- point out an obstacle to carrying out the approach the passage has just described
- concede that the critics' distinction between two kinds of disruption is unsound
- provide evidence that deliberate reserves of parts conceal routine operating problems
- recommend that firms stop reporting their carrying costs in their quarterly results
- explain why lean producers originally chose to keep their inventory to a minimum
Answer: a
After proposing tracked reserves, the passage says "the harder question is organizational": a reserve that is never used looks like waste on quarterly reports, so managers rewarded for low carrying costs may run it down. That names an obstacle to the proposal.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Lean Enterprise Institute: Taiichi Ohno led development of the Toyota Production System through the 1950s and 1960s; its just-in-time flow keeps stock low as part of removing waste. Supports the passage's background only; the argument about buffers is the passage's own.
Reading: supporting detail
The spread of occupational licensing
In the early 1950s, fewer than one in twenty American workers needed a license from a state government to do their jobs. By 2015, according to a federal report published that year, about one in four did. Roughly two thirds of that growth came not from a shift of workers into occupations that had always been licensed but from states adding new occupations to the licensed list.
The usual defense of licensing rests on a gap in information. A patient cannot easily judge a surgeon's skill before an operation, and a homeowner cannot inspect the wiring behind a finished wall. Requiring practitioners to meet a standard set by the state, the argument runs, protects buyers who cannot protect themselves. The argument is strongest where mistakes are costly and hard to detect, and weakest where buyers can judge quality for themselves or learn it cheaply from reviews and repeat dealings.
The costs of licensing fall on two groups. Consumers pay higher prices: studies reviewed in the federal report found price effects of between 3 and 16 percent. Workers who cannot meet the requirements are shut out, and those who move to another state may have to qualify again, since requirements vary widely. The report noted, for instance, that one state required three years of education and training to become a licensed security guard, while most states required 11 days or less.
Defenders of licensing sometimes point to the higher wages of licensed workers as a sign of higher quality. Higher wages, however, are just as consistent with restricted entry, which raises pay whether or not it improves service. The question that matters is whether licensing delivers better outcomes for buyers, and on that question the evidence the report assembled was mixed: in a number of studies, licensing did not raise the quality of goods and services at all.
According to the passage, most of the growth since the 1950s in the share of workers licensed by states came from
- a rise in the number of consumers able to judge quality for themselves
- workers moving into occupations that had always required a license
- federal rules that obliged the states to license many more trades
- states requiring licenses for occupations that had not needed them before
- a large increase in the number of practitioners moving between states
Answer: d
The first paragraph says roughly two thirds of the growth came "not from a shift of workers into occupations that had always been licensed but from states adding new occupations to the licensed list."
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Occupational Licensing: A Framework for Policymakers (Treasury, CEA and Labor, July 2015): the state-licensed share of workers rose from under 5 percent in the early 1950s to about 25 percent; about two-thirds of the change came from more professions requiring a license; price effects of 3 to 16 percent; Michigan required three years of training for security guards while most states required 11 days or less; in a number of studies licensing did not raise quality.
Reading: function and structure
The author mentions the requirements for licensed security guards primarily in order to
- show that security work is more dangerous than most licensed occupations
- suggest that three years of training is the right standard for every state
- illustrate how widely licensing requirements differ among states
- give an example of an occupation whose buyers cannot judge its quality
- prove that licensing raises the prices that consumers pay for security
Answer: c
The security guard figures come right after the statement that workers who move "may have to qualify again, since requirements vary widely." One state requiring three years and most requiring 11 days or less is an example of that variation.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Occupational Licensing: A Framework for Policymakers (Treasury, CEA and Labor, July 2015): the state-licensed share of workers rose from under 5 percent in the early 1950s to about 25 percent; about two-thirds of the change came from more professions requiring a license; price effects of 3 to 16 percent; Michigan required three years of training for security guards while most states required 11 days or less; in a number of studies licensing did not raise quality.
Reading: application
Based on the passage, the author would regard the case for licensing as strongest for which of the following occupations?
- Florists, whose arrangements every buyer can inspect closely before paying for them
- Installers of household gas lines, whose faulty joints are hidden and can cause fires
- Interior painters, whose finished work is visible and widely reviewed by past customers
- Tour guides, whose customers can compare many guides through detailed online ratings
- Barbers, whose regular customers can simply switch shops after one poor haircut
Answer: b
The second paragraph says the case for licensing "is strongest where mistakes are costly and hard to detect." A hidden faulty gas joint is both dangerous and invisible to the buyer; the other options describe work buyers can judge or learn about cheaply.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Occupational Licensing: A Framework for Policymakers (Treasury, CEA and Labor, July 2015): the state-licensed share of workers rose from under 5 percent in the early 1950s to about 25 percent; about two-thirds of the change came from more professions requiring a license; price effects of 3 to 16 percent; Michigan required three years of training for security guards while most states required 11 days or less; in a number of studies licensing did not raise quality.
Reading: inference
The author's discussion of the wages of licensed workers suggests that
- licensed workers are, on average, better trained than unlicensed workers
- licensing should be repealed in every occupation where wages are high
- restricted entry has no effect on the wages earned in licensed occupations
- higher pay for licensed workers does not by itself show better service
- buyers are generally willing to pay more for licensed services of high quality
Answer: d
In the last paragraph the author grants that licensed workers earn more but notes that restricted entry "raises pay whether or not it improves service." Higher wages therefore cannot settle the quality question by themselves.
Source: GMAT Focus Verbal Reasoning content (mba.com): Reading Comprehension passages of up to 350 words, with questions that test interpreting the text, drawing inferences and identifying relationships between its elements. Passage and questions are original.; Occupational Licensing: A Framework for Policymakers (Treasury, CEA and Labor, July 2015): the state-licensed share of workers rose from under 5 percent in the early 1950s to about 25 percent; about two-thirds of the change came from more professions requiring a license; price effects of 3 to 16 percent; Michigan required three years of training for security guards while most states required 11 days or less; in a number of studies licensing did not raise quality.
Critical reasoning: assumption
The argument about science laboratories depends on which of the following assumptions?
Nearly every winner of the regional science fair over the past decade attended a school with a dedicated science laboratory. The district should therefore build laboratories at its schools that lack them, since doing so will increase the number of its students who win the fair.
- Every school that receives a new laboratory will use it for all of its science classes.
- The judges at the science fair are not told which school each of the entrants attends.
- The winners' success is not due mainly to other advantages their schools have over the rest.
- Students at schools without laboratories have entered the science fair in past years.
- Building laboratories is the cheapest way to improve the district's science teaching.
Answer: c
The argument moves from a correlation (winners come from schools with labs) to a causal prediction. It must assume that the labs, not some other advantage of those schools such as funding or staff, account for the winners. If that assumption is false, the plan no longer follows.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Critical reasoning: roles in an argument
In the argument about the Harbor Bridge toll, the two portions in square brackets play which of the following roles?
Some analysts predict that [the new toll on the Harbor Bridge will push many commuters onto the free Ridge Road], worsening congestion there. But most bridge commuters are headed for the business district, and taking Ridge Road adds about forty minutes to that trip. [Few commuters are likely to accept such a delay to avoid a modest toll], so congestion on Ridge Road is unlikely to rise by much.
- The first is a prediction that the argument disputes; the second is the main conclusion of the argument.
- The first is a prediction that the argument disputes; the second is a judgment that supports its conclusion.
- The first is the main conclusion of the argument; the second is evidence offered in support of that conclusion.
- The first is evidence the argument relies on; the second is a consideration weighing against its conclusion.
- The first and the second are both predictions made by the analysts whose view the argument opposes.
Answer: b
The argument opposes the analysts' prediction (first portion). Its main conclusion follows "so": congestion on Ridge Road is unlikely to rise much. The second portion, that few commuters will accept a forty-minute delay, is the judgment from which that conclusion is drawn.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Critical reasoning: paradox
Which of the following, if true, most helps to explain the fall in Dorrance Hardware's power tool revenue?
After Dorrance Hardware cut the prices of all its power tools by 15 percent, the number of power tools it sold rose by 30 percent compared with the same months of the year before. Yet the store's total revenue from power tools fell.
- Several competing stores in the area also cut their prices on power tools during the same months.
- Dorrance advertised the price cut widely, both in local newspapers and on social media sites.
- Sales of hand tools and other hardware at Dorrance also rose during the same months of the year.
- After the cut, buyers chose far more cheap tools and far fewer costly ones.
- Dorrance's profit margin on each power tool it sold was lower after the price cut than before it.
Answer: d
With the same mix of tools, a 15 percent cut and 30 percent more units would raise revenue: 0.85 × 1.30 = 1.105, about 10.5 percent more. Revenue falls only if the average price per tool sold dropped below 1 ÷ 1.30, about 77 percent of its old level (a drop of more than 23 percent), which a shift toward the cheapest tools can produce.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Critical reasoning: strengthen
Which of the following, if true, most strengthens the software company managers' conclusion?
In a study of 40 software teams at one company, teams whose members worked in the same office finished their projects faster, on average, than teams whose members worked in different cities. The company's managers concluded that placing team members in the same office speeds up project completion.
- The projects given to the two kinds of teams were similar in size and in difficulty.
- Some members of the same-office teams worked from home on one day of every week.
- Members of the teams spread across cities held video meetings several times each week.
- Most of the company's employees say they prefer working in an office to working remotely.
- The company plans to open new offices in several cities where its remote staff live.
Answer: a
An obvious alternative explanation is that same-office teams got smaller or easier projects. If projects were similar in size and difficulty, that alternative is ruled out, and the office arrangement becomes the more likely cause.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Critical reasoning: evaluate
Which of the following would be most useful to know in evaluating the Brenford officials' argument?
The town of Brenford plans to replace its gas-powered leaf blowers with battery-powered ones. Battery-powered blowers cost more to buy, but town officials argue that the switch will save money over the life of the equipment, because electricity for charging costs far less than gasoline.
- Whether residents of Brenford prefer the quieter sound of battery-powered blowers
- Whether several neighboring towns have also switched to battery-powered blowers
- Whether the town's crews were consulted before the switch was publicly announced
- Whether the new blowers are made by the same company that made the old blowers
- How long the new blowers last and what their replacement batteries cost
Answer: e
The officials weigh a higher purchase price against lower fuel costs. Whether the switch saves money "over the life of the equipment" also depends on how long the new blowers last and what replacing their batteries costs, which the argument ignores.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Critical reasoning: inference
If the statements about Velmar are true, which of the following must be true?
In Velmar, a person can be elected to the national council only if he or she has lived in Velmar for at least ten years. Everyone who has lived in Velmar for at least ten years is entitled to vote there. Some people entitled to vote in Velmar were born abroad.
- Some of the members of Velmar's national council were born abroad.
- Everyone entitled to vote in Velmar has lived there for at least ten years.
- No one who was born abroad can be elected to Velmar's national council.
- Some people who are entitled to vote in Velmar cannot be elected to its council.
- Everyone elected to Velmar's national council is entitled to vote there.
Answer: e
Being elected requires at least ten years' residence (first statement), and ten years' residence brings the right to vote (second statement). Chaining the two, every elected member is entitled to vote. The other options reverse a conditional or go beyond the facts.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Critical reasoning: flaw
Which of the following most accurately describes a flaw in the business consultant's reasoning?
A survey of the shops that have operated on Carver Street for at least five years found that every one of them is profitable. A business consultant concludes that a new shop opening on Carver Street is very likely to be profitable.
- It assumes that profit is the only measure of whether a shop is a success.
- It fails to state how large the profits of the surveyed shops actually are.
- It ignores shops that closed before they had operated for five years.
- It treats the profitability of the shops as the cause of where they are located.
- It relies on the judgment of a consultant who may be biased toward the street.
Answer: c
Only shops that lasted five years were surveyed. Shops that failed sooner are invisible, so the sample is biased toward success and says little about the chances of a new shop.
Source: GMAT Focus Verbal Reasoning content (mba.com): Critical Reasoning gives a short argument and asks which of five options strengthens or weakens it, explains a flaw, or what it supports. The argument is original and fictional.; GMAC exam overview: Verbal Reasoning is 45 minutes and 23 questions and assesses critical reasoning and reading comprehension.
Data sufficiency
A courier charges a fixed fee for each parcel plus a constant rate for each kilogram the parcel weighs. How much does it charge to send a 10-kilogram parcel?
(1) It charges $22 for a 4-kilogram parcel and $31 for a 7-kilogram parcel.
(2) The fixed fee is $10 per parcel.
- Statement (1) alone is sufficient, but statement (2) alone is not sufficient.
- Statement (2) alone is sufficient, but statement (1) alone is not sufficient.
- Both statements together are sufficient, but neither statement alone is sufficient.
- Each statement alone is sufficient.
- Statements (1) and (2) together are not sufficient.
Answer: a
From (1), the 3 extra kilograms cost $9, so the rate is $3 per kilogram and the fee is 22 - 12 = $10; a 10-kilogram parcel costs 10 + 30 = $40. Statement (2) gives the fee but not the rate per kilogram, so the charge could be any amount above $10. Statement (1) alone answers the question and (2) alone does not.
Source: GMAC, Data Insights content: data sufficiency measures whether you can analyze a quantitative problem, see which data is relevant and tell when there is enough to solve it.; GMAC guide to Data Insights: each data sufficiency item gives two statements and the same five fixed answer choices, in the order used here.
Two-part analysis
On Tuesday morning a cafe sold only coffees, at $4 each, and sandwiches, at $7 each: 41 items in all, for a total of $230. Which pair gives the number of coffees sold and the number of sandwiches sold?
- 19 coffees and 22 sandwiches
- 22 coffees and 19 sandwiches
- 20 coffees and 21 sandwiches
- 16 coffees and 25 sandwiches
- 21 coffees and 22 sandwiches
Answer: a
Let c coffees and s sandwiches: c + s = 41 and 4c + 7s = 230. Substituting c = 41 - s: 164 + 3s = 230, so s = 22 and c = 19.
Source: GMAC, Data Insights content: two-part analysis covers quantitative or verbal problems, trade-offs, simultaneous equations and relationships between two entities.; GMAC guide: on the exam each part is answered in its own column, and one choice can answer both parts; written here with the pairs as options.
Graphics interpretation
Chart: visitors and conversion rate, January to June 2026
The chart shows two lines for an online kitchenware store over the first six months of 2026.
The first line, read on the left axis, is the number of site visitors in thousands: January 42, February 38, March 51, April 47, May 60, June 55.
The second line, read on the right axis, is the conversion rate, the percent of visitors who placed an order: January 2.5, February 3.0, March 2.2, April 2.8, May 2.0, June 2.6.
No visitor placed more than one order in a month, and the average order value was $64 in every month.
Select the option that best completes the statement. In the month with the most site visitors, the store received ____ orders.
- 1,050
- 1,200
- 1,316
- 1,430
- 12,000
Answer: b
May had the most visitors (60 thousand). Orders = 60,000 × 0.020 = 1,200.
Source: GMAC, Data Insights content: graphics interpretation asks you to read a graph (scatter plot, x/y graph, bar chart, pie chart or distribution) to discern relationships and make inferences.; GMAC guide: on the exam, graphics interpretation statements are completed from drop-down menus; here the blank is completed from five options.
Graphics interpretation
Select the option that best completes the statement. The month with the fewest orders was ____.
- January
- February
- March
- May
- June
Answer: a
Orders = visitors × rate: January 1,050; February 1,140; March 1,122; April 1,316; May 1,200; June 1,430. January is lowest.
Source: GMAC, Data Insights content: graphics interpretation asks you to read a graph (scatter plot, x/y graph, bar chart, pie chart or distribution) to discern relationships and make inferences.; GMAC guide: on the exam, graphics interpretation statements are completed from drop-down menus; here the blank is completed from five options.
Graphics interpretation
Select the option that best completes the statement. From January to June, the store's monthly revenue rose by about ____.
- 4 percent
- 27 percent
- 31 percent
- 35 percent
- 36 percent
Answer: e
Revenue = orders × $64, so its change equals the change in orders: 1,430 ÷ 1,050 = 1.362, a rise of about 36 percent. Equivalently 1.3095 (visitors) × 1.04 (conversion) = 1.362.
Source: GMAC, Data Insights content: graphics interpretation asks you to read a graph (scatter plot, x/y graph, bar chart, pie chart or distribution) to discern relationships and make inferences.; GMAC guide: on the exam, graphics interpretation statements are completed from drop-down menus; here the blank is completed from five options.
Table analysis
Table: Kestrel Logistics third-quarter lane report
Kestrel Logistics moves freight on seven regular lanes. The table gives third-quarter figures for each lane. The on-time rate is the percent of the lane's shipments that arrived by the promised date. Cost is the average cost to the company per shipment.
Columns: Lane | Distance (km) | Shipments | On-time rate | Average cost per shipment | Damage claims
Lane 1 | 420 | 1,150 | 94% | $380 | 6
Lane 2 | 610 | 820 | 88% | $512 | 9
Lane 3 | 290 | 1,480 | 97% | $265 | 4
Lane 4 | 755 | 600 | 81% | $648 | 11
Lane 5 | 380 | 990 | 91% | $355 | 5
Lane 6 | 520 | 760 | 85% | $470 | 8
Lane 7 | 680 | 1,020 | 90% | $575 | 9
How many Lane 4 shipments did not arrive on time in the third quarter?
- 19
- 81
- 114
- 486
- 519
Answer: c
Lane 4 had 600 shipments with an on-time rate of 81 percent, so 19 percent were late: 0.19 × 600 = 114.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.
Table analysis
Which lane had the lowest average cost per kilometer of distance?
- Lane 2
- Lane 3
- Lane 4
- Lane 5
- Lane 7
Answer: a
Cost per kilometer: Lane 2 0.839, Lane 7 0.846, Lane 4 0.858, Lane 6 0.904, Lane 1 0.905, Lane 3 0.914, Lane 5 0.934. Lane 2 is lowest.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.
Table analysis
Among the lanes longer than 500 kilometers, which had the fewest damage claims per 1,000 shipments?
- Lane 1
- Lane 2
- Lane 3
- Lane 6
- Lane 7
Answer: e
Lanes over 500 km: 2, 4, 6 and 7. Claims per 1,000 shipments: Lane 2 9/820 = 11.0, Lane 4 11/600 = 18.3, Lane 6 8/760 = 10.5, Lane 7 9/1,020 = 8.8. Lane 7 is lowest; Lane 6 has the fewest claims (8), but it carried fewer shipments, so its rate is higher.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.
Table analysis
The company labels a lane "at risk" if its on-time rate is below 90 percent. About what percent of all third-quarter shipments traveled on at-risk lanes?
- 20%
- 32%
- 43%
- 47%
- 68%
Answer: b
At-risk lanes (below 90%): Lane 2 (820), Lane 4 (600), Lane 6 (760), total 2,180 shipments. All shipments: 1,150 + 820 + 1,480 + 600 + 990 + 760 + 1,020 = 6,820. Share = 2,180 ÷ 6,820 = 32.0 percent.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.
Table analysis
Table: coworking sites in October
A company that runs six coworking sites recorded the figures below for October. Occupancy is the percent of a site's desks that were rented for the month, and every rented desk paid the site's monthly price. Satisfaction is the average member rating on a scale of 1 to 10.
Columns: Site | Desks | Occupancy | Monthly price per desk | Satisfaction
Alder Works | 120 | 85% | $310 | 8.1
Birch Hub | 90 | 90% | $340 | 7.4
Cedar Loft | 60 | 75% | $260 | 8.6
Delta Yard | 150 | 68% | $280 | 6.9
Elm Point | 80 | 95% | $250 | 7.8
Fir Street | 110 | 80% | $295 | 7.1
How many desks at Fir Street were rented in October?
- 20
- 22
- 80
- 88
- 110
Answer: d
Fir Street has 110 desks at 80 percent occupancy: 0.80 × 110 = 88 rented desks.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.
Table analysis
Which site earned the most October revenue from its rented desks?
- Alder Works
- Birch Hub
- Delta Yard
- Elm Point
- Fir Street
Answer: a
Revenue = desks × occupancy × price: Alder 120 × 0.85 × 310 = 31,620; Delta 102 × 280 = 28,560; Birch 81 × 340 = 27,540; Fir 88 × 295 = 25,960; Elm 76 × 250 = 19,000; Cedar 45 × 260 = 11,700. Alder Works is highest.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.
Table analysis
Based on the October figures, which of the following statements is true?
- Every site rated above 8.0 for satisfaction is more than 80 percent occupied.
- The two sites with the most desks have more than 210 rented desks between them.
- The average monthly price per desk across the six sites is more than $300.
- The site with the highest occupancy also charges the lowest price per desk.
- Birch Hub has more rented desks than Fir Street has.
Answer: d
Elm Point has both the top occupancy (95%) and the lowest price ($250), so that statement holds. The others fail: Cedar Loft is 8.6 but 75% occupied; Delta and Alder have 102 + 102 = 204 rented desks; the average price is 1,735 ÷ 6 = $289.17; Birch has 81 rented desks and Fir Street 88.
Source: GMAC, Data Insights content: table analysis asks you to sort and analyze a spreadsheet-like table to find what is relevant or meets given conditions.; GMAC guide: on the exam, table analysis answers are yes/no or true/false judgments that must be fully supported by the table; written here as one single-answer question.