Country or region and language

    Choose your country or region and your language.

    Suggested for you

      All countries and regions

        Choose your character

        It shows in the top bar and on your profile. Change it any time.

        Interviews in PLC programming

        Work in the tool while you explain your decisions.

        Choose a role and level. Each interview has a new task, follow-up questions and a report that checks your work and your explanation.

        Speak or type. Sign in to save your results across devices.

        Timed assessment

        • 12 practical questions
        • 45 minutes
        • Mid level

        Questions are drawn from a bank of 36. Your report includes a skill breakdown and lessons to practice next.

        Practice interviews

        Junior tasks cover the fundamentals. Mid and senior tasks add debugging, changing requirements and review decisions.

        18 interviews

        • Controls engineer
        • Junior
        • 30 min

        Conveyor discharge permissive

        Run N50000_Motor only while N50000_Request and N50000_Ready are true and N50000_Blocked is false. A blocked discharge must stop it in the same scan. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricConveyor discharge permissive
        • Explain how the request, readiness and blocked discharge jointly control the conveyor motor.
        • Read the requested inputs and point to one scan that matches the expected output.
        • State what the browser program proves and ask before making assumptions about real equipment.
        • Controls engineer
        • Junior
        • 30 min

        Guarded local or remote request

        Accept either N50001_Local or N50001_Remote to run N50001_Motor, but only when N50001_GuardClosed is true. Include the case where both requests are true. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricGuarded local or remote request
        • Explain why either local or remote demand can run the motor only with the shared guard closed.
        • Read the requested inputs and point to one scan that matches the expected output.
        • State what the browser program proves and ask before making assumptions about real equipment.
        • Controls engineer
        • Junior
        • 30 min

        Full-level sensor polarity

        Run the fill pump while N50002_Enable is true and N50002_Full is false. N50002_Full means the tank has reached its upper level. Stop filling when N50002_Full becomes true. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricFull-level sensor polarity
        • Explain why a true full-level signal stops filling and why operator enable is also required.
        • Read the requested inputs and point to one scan that matches the expected output.
        • State what the browser program proves and ask before making assumptions about real equipment.
        • Controls engineer
        • Junior
        • 30 min

        Same-scan inspection lamp

        Copy N50003_Sensor into N50003_Sample before driving N50003_Lamp from N50003_Sample. N50003_Lamp must reflect N50003_Sensor in the same scan, on both rising and falling changes. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricSame-scan inspection lamp
        • Explain why the sensor sample must be written before the inspection lamp reads it in the same scan.
        • Read the requested inputs and point to one scan that matches the expected output.
        • State what the browser program proves and ask before making assumptions about real equipment.
        • Controls engineer
        • Junior
        • 30 min

        Stable-request start delay

        Use a 500 ms on-delay with 100 ms scans. N50004_Motor turns on at the fifth consecutive true N50004_Request scan. A false N50004_Request resets elapsed time. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricStable-request start delay
        • Relate the 500 ms start delay to five consecutive 100 ms scans with the request true.
        • Read the requested inputs and point to one scan that matches the expected output.
        • State what the browser program proves and ask before making assumptions about real equipment.
        • Controls engineer
        • Junior
        • 30 min

        Three separate package edges

        Set N50005_Ready after three rising edges of N50005_Pulse. Holding N50005_Pulse true must count only once. N50005_Reset clears the count and wins when N50005_Reset and N50005_Pulse are true together. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricThree separate package edges
        • Explain why three separate rising package pulses complete the batch while one held pulse counts once.
        • Read the requested inputs and point to one scan that matches the expected output.
        • State what the browser program proves and ask before making assumptions about real equipment.
        • Controls engineer
        • Mid
        • 30 min

        Stop-priority seal-in circuit

        Latch N50006_Run on N50006_Start. N50006_Stop or loss of N50006_Healthy clears N50006_Run. N50006_Motor follows N50006_Run. Restoration of N50006_Healthy alone must not restart N50006_Motor, and simultaneous N50006_Start and N50006_Stop must stop it. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricStop-priority seal-in circuit
        • Trace simultaneous start and stop, then remove and restore the healthy signal without issuing a fresh start.
        • Compare original and changed input sequences and explain the first scan where a wrong program diverges.
        • Retain the program, declared tags, scan period and expected outputs so a colleague can reproduce the check.
        • Controls engineer
        • Mid
        • 30 min

        Reject conflicting direction commands

        N50007_Forward runs only with N50007_FwdRequest and no N50007_RevRequest. N50007_Reverse runs only with N50007_RevRequest and no N50007_FwdRequest. N50007_Enable is required for either output. Conflicting requests turn both outputs off. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricReject conflicting direction commands
        • Test forward alone, reverse alone, conflicting requests and lost enable, checking both outputs on every scan.
        • Compare original and changed input sequences and explain the first scan where a wrong program diverges.
        • Retain the program, declared tags, scan period and expected outputs so a colleague can reproduce the check.
        • Controls engineer
        • Mid
        • 30 min

        Inclusive process window

        Set N50008_InRange only when N50008_Level is between 25 and 75 inclusive. Test both exact boundaries and a value on either side. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricInclusive process window
        • Check the exact endpoints and their outside neighbors to distinguish inclusive AND logic from exclusive or OR logic.
        • Compare original and changed input sequences and explain the first scan where a wrong program diverges.
        • Retain the program, declared tags, scan period and expected outputs so a colleague can reproduce the check.
        • Controls engineer
        • Mid
        • 30 min

        Offset analog scaling

        Convert N50009_Raw from 400..2000 units to N50009_Display from 0..100. Subtract the input offset before dividing by 16. Intermediate readings must remain proportional. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricOffset analog scaling
        • Reconcile the 400 and 2000 endpoints and an intermediate reading to expose a missing offset or a wrong denominator.
        • Compare original and changed input sequences and explain the first scan where a wrong program diverges.
        • Retain the program, declared tags, scan period and expected outputs so a colleague can reproduce the check.
        • Controls engineer
        • Mid
        • 30 min

        Cooling fan off-delay

        N50010_Fan starts immediately with N50010_Request. After N50010_Request falls, keep N50010_Fan on for the first two 100 ms scans and turn it off on the third. A new true N50010_Request restarts the cooling cycle. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricCooling fan off-delay
        • Trace the falling request through the third 100 ms scan and reassert the request during the cooling delay.
        • Compare original and changed input sequences and explain the first scan where a wrong program diverges.
        • Retain the program, declared tags, scan period and expected outputs so a colleague can reproduce the check.
        • Controls engineer
        • Mid
        • 30 min

        Active alarm and acknowledgment

        N50011_High activates Overfill and blocks N50011_Fill. N50011_Ack records N50011_Acknowledged only while N50011_High remains true. Acknowledging must not clear the active Overfill alarm. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricActive alarm and acknowledgment
        • Test acknowledgment with the high-level condition active and cleared, checking the alarm, acknowledgment and fill outputs separately.
        • Compare original and changed input sequences and explain the first scan where a wrong program diverges.
        • Retain the program, declared tags, scan period and expected outputs so a colleague can reproduce the check.
        • Controls engineer
        • Senior
        • 30 min

        Structured text clamp

        Write N50012_Display as 0 below zero, 100 above 100 and the unchanged N50012_Demand otherwise. Assign every branch so a falling N50012_Demand cannot leave a stale value. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricStructured text clamp
        • Show that every execution path assigns the current result after a range change, including exact endpoints and transitions from either clamped state.
        • Define the acceptance evidence and review owner before changing timing, reset priority or restart assumptions.
        • Separate the simulated behavior from wiring, safety validation and permission to restart physical equipment.
        • Controls engineer
        • Senior
        • 30 min

        Tank hysteresis memory

        Start N50013_Fill at N50013_Level 25 or lower and keep filling through the middle band. Stop at 75 or higher and remain stopped through the middle band until N50013_Level reaches 25 again. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricTank hysteresis memory
        • Defend the hysteresis memory under oscillating readings and state the initialization and restart assumptions before changing either threshold.
        • Define the acceptance evidence and review owner before changing timing, reset priority or restart assumptions.
        • Separate the simulated behavior from wiring, safety validation and permission to restart physical equipment.
        • Controls engineer
        • Senior
        • 30 min

        One package per sensor transition

        Increment N50014_Total once for each rising N50014_Sensor edge. Keep N50014_Previous as the previous scan input. A held sensor and a falling edge must not increment N50014_Total. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricOne package per sensor transition
        • Explain how moving the memory write changes counts and state the startup sensor assumption before accepting a revised edge detector.
        • Define the acceptance evidence and review owner before changing timing, reset priority or restart assumptions.
        • Separate the simulated behavior from wiring, safety validation and permission to restart physical equipment.
        • Controls engineer
        • Senior
        • 30 min

        Live HMI process binding

        Copy N50015_Level into N50015_Display and bind an HMI indicator to N50015_Display. The indicator must follow changes in N50015_Level rather than show a fixed commissioning value. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricLive HMI process binding
        • Define evidence for a live binding after a tag or units change, and distinguish a simulated display update from validation of a physical sensor.
        • Define the acceptance evidence and review owner before changing timing, reset priority or restart assumptions.
        • Separate the simulated behavior from wiring, safety validation and permission to restart physical equipment.
        • Controls engineer
        • Senior
        • 30 min

        Traffic phase exclusion

        N50016_Phase 0 lights N50016_Red, phase 1 lights N50016_Green and phase 2 lights N50016_Amber. An invalid phase lights N50016_Red only. Never energize two colors together. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricTraffic phase exclusion
        • Demonstrate exclusive outputs after a phase-map change and explain how incomplete assignments can retain a previously lit color despite a correct new phase.
        • Define the acceptance evidence and review owner before changing timing, reset priority or restart assumptions.
        • Separate the simulated behavior from wiring, safety validation and permission to restart physical equipment.
        • Controls engineer
        • Senior
        • 30 min

        Package count reset under a held sensor

        Count four rising edges of N50017_Item before N50017_Complete turns on. N50017_Reset clears N50017_Complete immediately, even with N50017_Item held true. Releasing N50017_Reset while N50017_Item stays true must not count another item. Use the declared tag names in the I/O panel; N-prefixed tags belong to this independent interview case.

        Start interview
        Skills and rubricPackage count reset under a held sensor
        • Defend reset priority and edge-memory updates as separate obligations, using a release-under-load trace before approving a batch-size or reset change.
        • Define the acceptance evidence and review owner before changing timing, reset priority or restart assumptions.
        • Separate the simulated behavior from wiring, safety validation and permission to restart physical equipment.

        Interview Hub access

        The Interview Hub is included in All Access. Choose a plan or sign in to your account to continue.

        View plansSign in or join

        Your Work Gym account

        Save your progress and pick up on another device. Your browser's progress comes with you.

        or

        You can keep practicing without an account.

        Change your plan

        Checking the price

        Help and feedback

        Ask a question, tell us what is not working, or share an idea. We reply by email.

        What is it about?

        We use it only to reply to you.