Country or region and language

    Choose your country or region and your language.

    Suggested for you

      All countries and regions

        Choose your character

        It shows in the top bar and on your profile. Change it any time.

        Courses / Engineering

        PLC programming course with a ladder logic simulator

        Learn PLC programming by editing ladder logic and watching a simulated machine respond. Test contacts, coils, timers and counters in your browser, then work through structured text, HMI tags and fault finding. You can inspect the I/O and run another scan after each change.

        Start lesson 1Practice interviewTake the assessmentPractice the first unit of every course. No account needed.
        61lessons
        344checked exercises
        13projects, cases and exams
        Prepares you for Controls engineer interviews and original timed PLC programming assessments

        What you will be able to do

        • Build and test ladder rungs with contacts, coils and parallel branches
        • Use timers, counters, latches, comparisons and arithmetic
        • Read I/O states and trace the cause of a machine fault
        • Practice structured text basics and connect HMI tags to alarms

        Who it is for

        You are starting industrial controls
        Start with Boolean inputs and outputs before you control a fictional conveyor or tank.
        You are preparing for controls work
        Practice a change, test the stop condition and explain the evidence behind a fault diagnosis.

        What you can practice free

        Unit 1, Signals and scan order: 4 lessons and 20 checked exercises, with no account or card.

        Start the free unit

        The rest of the course opens with a One Course or All Access plan. See plans and prices

        Keep going in PLC programming

        Choose access here. Your course is already selected.

        One Course

        Every lesson, project and mock exam in PLC programming.

        Loading price/ month

        Billed monthly. Cancel any time.

        All Access

        Every course, exam and project, plus the Interview Hub.

        Loading price/ month

        Billed monthly. Cancel any time.

        Projects, case studies and mock exams

        Project · IntermediateConveyor commissioning handoff

        Conveyor commissioning handoff: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Case study · IntermediateInterrupted-delay incident

        Interrupted-delay incident: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Project · IntermediateBatch counter delivery

        Batch counter delivery: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Case study · IntermediateTank measurement investigation

        Tank measurement investigation: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Project · AdvancedYard signal controller

        Yard signal controller: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Project · AdvancedOperator display handoff

        Operator display handoff: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Case study · ExpertRetained fault recovery case

        Retained fault recovery case: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Project · ExpertPackaging line acceptance

        Packaging line acceptance: deliver the requested control behavior and verify the changed conditions.

        7 steps · 50 min
        Mock exam · ExpertPLC practical job assessment 1

        PLC practical job assessment 1: deliver the requested control behavior and verify the changed conditions.

        12 questions · 45 min
        Mock exam · ExpertPLC practical job assessment 2

        PLC practical job assessment 2: deliver the requested control behavior and verify the changed conditions.

        12 questions · 45 min

        Practice PLC programming in an original browser editor and simulator. Begin with contacts, coils and scan order, then build remembered state, timers, counters, compare and math blocks. Control fictional conveyors, tank filling, yard signals and packaging stations. Write a documented Structured Text subset, bind live HMI tags and diagnose alarms on changing inputs. Four levels include fresh practice, connected projects, checked incident cases, interviews and two timed practical job assessments. The concepts transfer to Allen-Bradley and Siemens work, but this independent simulation runs no vendor software and does not connect to equipment. It does not cover certified safety design or grant a certification.

        Interview practice

        Explain what you've learned in a full-screen interview. Speak or type, then review your answers against the rubric for your level.

        Interview loops by job

        Beginner

        FreeNo account or card needed. Every lesson in this unit is yours to practice.

        Signals and scan order

        Practice signals and scan order through observable machine behavior.

        4 lessons

        Permissives and remembered state

        Practice permissives and remembered state through observable machine behavior.

        4 lessons

        Scan-aware control

        Practice scan-aware control through observable machine behavior.

        5 lessons

        Intermediate

        Timers and interrupted conditions

        Practice timers and interrupted conditions through observable machine behavior.

        5 lessons

        Counters and production totals

        Practice counters and production totals through observable machine behavior.

        6 lessons

        Compare and math blocks

        Practice compare and math blocks through observable machine behavior.

        5 lessons

        Advanced

        Machine sequences

        Practice machine sequences through observable machine behavior.

        5 lessons

        Structured Text

        Practice structured text through observable machine behavior.

        5 lessons

        HMI tags and alarms

        Practice hmi tags and alarms through observable machine behavior.

        5 lessons

        Expert

        Fault finding on running programs

        Practice fault finding on running programs through observable machine behavior.

        5 lessons

        Packaging and delivery

        Practice packaging and delivery through observable machine behavior.

        6 lessons

        Controls engineering assessment

        Practice controls engineering assessment through observable machine behavior.

        6 lessons

        Ladder logic practice

        A rung can work when the start button is pressed and still fail when an input changes. Check the whole sequence: start, keep running, stop, reset and restart. In the PLC programming exercises, you change the logic and test the result against the task. Test every input combination.

        Use the ladder logic reference when you need to distinguish series contacts from parallel branches. The timer guide works through a delayed output and an interrupted delay. A counter has a different job: it tracks input transitions, so leaving a sensor on should not count another part on every scan.

        Controls engineering practice

        The projects use fictional machines to connect a program to observable behavior. A conveyor must stop when its permission disappears. A tank must respond to its level inputs. An alarm needs a reason to become active and a clear reset condition.

        The browser model has a defined instruction set and simulated time. Use it to practice logic and diagnosis, then study the documentation for the controller you will use. Commissioning, electrical design, safety validation and hardware communication are outside this course.

        Prepare a spoken explanation in the controls engineer interview practice. Explain which input you inspected, what the rung should do and how you would confirm the repair.

        Common questions

        Does this run Allen-Bradley or Siemens software?

        It is our own generic teaching simulator. Ladder logic skills transfer to work with Allen-Bradley and Siemens systems, but their instruction syntax, hardware configuration and engineering software need separate study.

        Can this control a real machine?

        No. All inputs and machines are fictional and run in your browser. A simulated stop input is a programming exercise, not a safety circuit or a machine risk assessment.

        Does the course award PLC certification?

        We provide independent practice. Read the PLC certification guide for vendor training routes and the limits of our mock exams.

        Where can I check access?

        The pricing page shows every plan. The course page lists the units and practice before you choose one.

        Your Work Gym account

        Save your progress and pick up on another device. Your browser's progress comes with you.

        or

        You can keep practicing without an account.

        Change your plan

        Checking the price

        Help and feedback

        Ask a question, tell us what is not working, or share an idea. We reply by email.

        What is it about?

        We use it only to reply to you.